List of products by brand Resineco
Our own brand, selected products
Active filters
VACUUM BAG 50 MICRONS TUBE 30 CM (ORANGE)
Bag for infusion or vacuum. 50 microns, orange, 30cm width (tubular)._x000D_
THIX - FOR SILICONE
Solution to modify the viscosity of RTV silicones. Especially recommended for SILTHIXO silicone. Save time and silicone.
RADIAL VACUOMETER 1/4 "63MM -1 BAR
Large vacuum gauge (63mm) to accurately measure the level of vacuum in the bag during infusion or vacuum compaction.
V PLAIN 163 GR
Flat fabric of 163 gr / m2 Format: 1 ML (width 1000mm) ideal for work with polyester resin or epoxy resin
MICROSPHERAS GLASS 130 GRS (UD)
Glass microspheres filler for the production of putties, filleting and reinforcement of polyester and epoxy resins.
INFUSION INPUT MESH 2X7,5CM (YELLOW) 1 ML
mesh tube mesh Yb1 infusion input
POLYESTER RESIN CATALYST
Catalyst for polyester resins and gelcoats. Usual ratio 1.25 to 2%. Always consult the resin technical data sheet.
SILICONE CATALYST
Silicone catalyst for RTV molds, with blue pigment or without as an indicator of homogeneous mixing w
GREENPOXY 55
Epoxy resin with Bio Mass 55% Replaces the consumption of mineral resources by plant resources
1/4 "FEMALE MALE REDUCED BALL VALVE (UD)
The key that allows to open and close the vacuum circuit in the infusion
V TWILL 165 GR SARGA 100CM
TWILL or SARGA fabric of 165 gr / m2 Format: 1 ML (width 1000mm) ideal for work with polyester resin or epoxy resin
COMPLEX INFUSION MESH (150X100CM) (3 IN 1)
complex 1,5m x 100m_x000D_ _x000D_ the COMPLEX mesh integrates the drainage mesh, the perforated film and even the Peel Ply, and saves time, resin and effort in separating the consumables from the finished piece.
POLYESTER / EPOXI PIGMENTED PASTE
Colored pigmented paste for polyester or epoxy resins. For opaque and sun resistant colors. Very stable color, does not vary during resin drying.
V PLAIN 210 GR
210 gr / m2 flat fabric Format: 1 ML (width 1000mm) ideal for work with polyester resin or epoxy resin
FLOWMESH LIGHT INFUSION MESH 125 CM 1 M2
Flowmesh is a perfect drain mesh for learning, thanks to its flexibility and ease of application. It comes with black weft threads that indicate the optimal resin flow direction. Thanks to its great flexibility, it is the most recommended mesh for small surfaces with complicated, angular areas.
THIXOTROPE FOR JESMONITE
Thixotropic thickener additive for resin references Jesmonite AC100, AC200, AC300. So you don't pick up. Save time and material. Recommended mixing ratio of 2 to 6 grams per kg of mixture.
POLYESTER / EPOXI TRANSPARENT PIGMENT
Concentrated color transparent pigment. It gives color to the piece and maintains transparency. UV resistant.
SURF CLEAR EPOXY
Transparent epoxy for fiberglass. Its medium viscosity and adherence is perfect to manufacture and repair of laminates. It has very good UV stability
BIAXIAL +/-45º - 315 GR, 125CM M2
Biaxial fiberglass fabric +/- 45º Format: 1 M2 (width 1250mm) ideal for works with polyester resin or epoxy resin
EPOXI FIBER KIT
Standard epoxy resin for laminates with fiberglass, carbon fiber, coating of portrex (expanded polystyrene). Thanks to its medium viscosity and fast drying it is widely used for all types of repairs, molds and final piece.
Under the Resineco brand, you can find a selection of polyester, epoxy, fiber resins ...