Glass microspheres filler for the production of putties, filleting and reinforcement of polyester and epoxy resins.
(a modificar al mòdul de reassegurances del client)
(a modificar al mòdul de reassegurances del client)
(a modificar al mòdul de reassegurances del client)
Glass microspheres are a low-density, inorganic mineral filler ideal for the formulation of putties, fillets, coatings, and structural reinforcements in polyester, epoxy, and other thermosetting resin systems. Their spherical shape and uniform particle size enhance the workability of mixtures, reduce the weight of the final product, and improve mechanical performance.
At Resineco.com, we offer high-quality glass microspheres that deliver excellent thermal insulation, chemical resistance, buoyancy, and shrinkage control during curing. They are widely used in industries such as marine, automotive, construction, prototyping, and composite part repair.
These fillers are compatible with a wide range of resins, allowing for lighter formulations, easier sanding, and smoother finishes. By lowering the density, they also offer significant volume savings without compromising strength.
Main applications:
Production of lightweight, high-build putties
Repair of laminates and polyester or epoxy surfaces
Reinforcement of joints, corners, and structural fillets
Performance optimization in composite systems
Data sheet
Aerosil or Cabosil, are trademarks of the same product. It is an additive to increase the viscosity of epoxy resins, polyester and other fluids. 350 grs format. Its main component is "Pyrogenic Silica"
HEXCEL PLAIN fabric of 206 gr / m2 (6 Ounces) Format: 1 ML (650mm width) ideal for work with polyester resin or epoxy resin
Transparent epoxy for fiberglass. Its medium viscosity and adherence is perfect to manufacture and repair of laminates. It has very good UV stability
Transparent resin for surfboards. Medium viscosity and fast cure. Specific for surfboards and nautical. Very fast drying, good UV resistance.
It is a lightweight, multifunctional polyester filler for repairing all types of car bodies. Its advantage over conventional fillers is its excellent adhesion to galvanized coatings used on car bodies, as well as to aluminum. It is easy to apply, dries quickly, and, above all, is easy to sand, allowing you to start sanding with P120 grit sandpaper. It leaves no pores.
Release agent by silicone oil spray, highly recommended to facilitate subsequent reproduction in silicone molds,
Aerosil or Cabosil, are trademarks of the same product. It is an additive to increase the viscosity of epoxy resins, polyester and other fluids. 350 grs format. Its main component is "Pyrogenic Silica"
Transparent resin for surfboards. Medium viscosity and fast cure. Specific for surfboards and nautical. Very fast drying, good UV resistance.
Catalyst for polyester resins and gelcoats. Usual ratio 1.25 to 2%. Always consult the resin technical data sheet.
Silicone RTV (Room Temperature Vulcanization) of high viscosity (thixotropic) special for large molds applied by layers. Requires THIX additive to control viscosity.
Glass microspheres filler for the production of putties, filleting and reinforcement of polyester and epoxy resins.
