In RESINECO we have the priority to offer products of the best quality and with innovative elements in terms of safety and ease of use. In this section you can find polyester resin with special characteristics that make it different from those that are easier to find in the market.
We emphasize the ADHyECO orthophthalic polyester resin that contains a paraffin that blocks the emission of styrene vapors without limiting its interlaminar adhesion.
We have recently added to our range transparent polyester resin or glass for castings, casting polyester resin without pre-accelerate to control the temperature of curing of different sizes of castings and a polyester resin for flexible lamination that allows to manufacture large laminates with fiber of glass without expansion joint (special for swimming pools and terraces)
In this way you gain in comfort and lower the security requirements of the facilities in which it is used.
We also have resins that contain monomers other than styrene and make it easier to apply them on materials that traditional polyester resins attack and make their application impossible. The best example is polyester resin for POREX.
If you need Gelcoats or brush or gun Topcoats we have a color chart at your disposal.
Low styrene emission resins containing paraffin that blocks the styrene evaporation and make their application more comfortable. Thanks to the ADHyECO technology, do not limit its grip in comparison with other low styrene-emission resins.
RP POREX is an unsaturated polyester resin, orthophthalic, pre-accelerated, medium reactivity, medium viscosity, diluted in styrene and methacrylic monomer.
This resin does not affect the styrofoam
Because of its composition, it is a resin especially indicated for uses where good adhesion to expanded or extruded polystyrene is required (porex / styrofoam / white cork)
IMPORTANT NOTE:
The resin does not break the porex by contact, but it is important to take into account that it is necessary to avoid accumulating thicknesses or accumulations of resin because the resin when hardening can get too hot, and in that case, due to the heat if it could deteriorate the material.
The OCL transparent polyester resin for casting is a surprise for its stunning transparency. Thanks to its formulation, it gets almost finished lens, similar to ice. It is a perfect resin for inclusions and thanks to its very low viscosity, does not keep inside bubbles and heated moderately for curing. Therefore, extends the life of the molds and castings supports larger sizes.
UV GLASS POLYESTER is an unsaturated polyester resin, Orthophthalic, low reactivity, medium viscosity, pre-accelerated, controlled exotherm, and with very high transparency, especially suitable for surfboards. It has been formulated for highly transparent surfaces with quick drying.
features:
Polynt Technology
Sunlight estabilized
Surfboards
Polyester resin for casting is not promoted and it is the most versatile resin because it can be adapted to our needs. Thanks to its low viscosity accept a significant mix ratio of fillers, achieving greatly increased the volume of the casting.
It is a very transparent resin that does not turn off the colors of pigments or charges. This resin is not accelerated and can be adapted by the proportion of cobalt octoate to get set drying times, or facilitate cast of significant sizes.
Polyester resins require additives for curing properly. Apart from the essential catalyst of MEK Peroxide, in this section you can find:
Promoter: to reduce the working time and curing the resin
Retardant: to extend the working time of the resin.
Flexible resin, to mix with any polyester and achieve greater tenacity and strength.
Thickening: Aerosil to increase viscosity
Styrene and Paraffin Styrene: to lower the viscosity and eliminate the superficial tacky
Pigmented colored pastes for polyester resins. Presentation in formats of 100 and 500gr.
Transparent concentrated pigment for polyester and epoxy resins. Presentation in 50gr format.
Pigments with very high performance.
They are not suitable for Jesmonite Acrylic Resin. You can check Pigments for Jesmonite in this category.
Fillers for polyester resin fulfill specific functions. They are divided into 2 large types:
Functional Fillers
Give the polyester resin different mechanical characteristics. Lightness, strength, weight, viscosity, volume ... in this way you can improve and adapt the resins to our specific application.
Decorative Fillers
Although they do not contribute to increase mechanical characteristics, provide decorative effects that allow the user to give the desired finish to their pieces. We have metal fillers of bronze, copper, brass as well as mineral charges that allow artificial stone to be manufactured. The pigments for the resin, although they can be defined as a decorative filler, because of their very low proportion, we frame them in a separate section.
It is important to keep in mind that in decorative fillers, if the usual proportions are exceeded, the piece can be mechanically weakened.
The Polyester Mastic is a very useful accessory for straightening any surface of fiberglass. It can be used to cover cracks, repair holes quickly and efficiently.
You can find the putty with or without fiber, depending on the need. The fine for smooth surfaces and the fiberglass for structural repairs
Catalyst for polyester resins and gelcoats. Usual ratio 1.25 to 2%. Always consult the resin technical data sheet.
Resin indicated for uses in which adhesion to expanded polystyrene "porex" / "white cork" is required as it does not attack or undo it. Ideal for scenographies, sets and labels.
Clear polyester resin for casting. Great transparency For encapsulation, occlusion, imitation glass and translucent decorative objects
Polyester resin for casting of any size, without pre-accelerating. Cobalt Octoate and MEK must be added depending on the size of the casting.
Polyester resin for laminates and laminated with fiberglass. Low emission of styrene for less irritating odors, good adhesion and comfort of use. For all types of parts and general use.
Polyester putty, to refine details, rectify molds and repair fiberglass laminates with resin. 330 gr format
It is a highly flexible polyester putty, specially designed for repairing plastics, polyester parts, and fiberglass. Ideal for repairing small defects and scratches on bumpers.
Concentrated color transparent pigment. It gives color to the piece and maintains transparency. UV resistant.
Cobalt Octoate is a solution that is used to modify the cure time of polyester resins.
Styrene monomer with 5% paraffin addition. To remove the mordant of polyester resins. Turn a Gel-Coat into a Top-Coat or to surfboard glaze.
Usual filler for casting polyester resin. Increase the volume of the resin, gives mechanical properties. Reduce the exotherm of the resin and reduce the cost of the final piece.
Resin application kit, either polyester, epoxy or jesmonite that includes:
SOFT FINE multi-function is a multi-functional polyester filler that can be applied with excellent adhesion to steel, electro-galvanized, galvanized, or aluminum sheets. It stands out for its excellent sandability and ease of application, thanks to its creamy consistency and fine texture. Furthermore, it can be used both as a filler and a finishing filler. Another key feature of this filler is its suitability for use in the marine sector.
Glitter chips are fine like sand, also a little coarser up to about 3mm and can be mixed excellently with Jesmonite or other resins. Glitter chips give your creation an elegant and attractive final result!
Perfect for use with JESMONITE AC100
Size 30gr
Colored pigmented paste for polyester or epoxy resins. For opaque and sun resistant colors. Very stable color, does not vary during resin drying.
Medium weight. versatile for molds and repairs of all kinds. The most common fiber for polyester resin.
Transparent resin for surfboards. Medium viscosity and fast cure. Specific for surfboards and nautical. Very fast drying, good UV resistance.
Aerosil or Cabosil, are trademarks of the same product. It is an additive to increase the viscosity of epoxy resins, polyester and other fluids. 350 grs format. Its main component is "Pyrogenic Silica"
It is a lightweight, multifunctional polyester filler for repairing all types of car bodies. Its advantage over conventional fillers is its excellent adhesion to galvanized coatings used on car bodies, as well as to aluminum. It is easy to apply, dries quickly, and, above all, is easy to sand, allowing you to start sanding with P120 grit sandpaper. It leaves no pores.
The silver flakes are so fine and soft and can be mixed excellently with Jesmonite or other resins. get an elegant and eye-catching final result!
Perfect for use with JESMONITE AC100
Format 5 gr
155mm long wooden sticks for mixing all types of resins. Pack of 25 units
Pure metal filler for Jesmonite resins. 99,9% of metal powder to achieve amazing real metal effects.
weighing scale of 5 kg, precision 1 gram. Ideal for weighing and correctly dosing all resins.
FIBERPLAST fibreglass is a polyester body filler reinforced with fibreglass for stronger resistance. Suitable to repair polyester parts and areas with metal rust. The size of the fibre particles allow an easy application.
