Bag for infusion or vacuum. 50 microns, orange, 30cm width (tubular)._x000D_
(a modificar al mòdul de reassegurances del client)
(a modificar al mòdul de reassegurances del client)
(a modificar al mòdul de reassegurances del client)
Bag for infusion or vacuum. 50 microns, orange, 50cm width (tubular)
Vacuum bag for infusion or vacuum. 65 microns, blue, width 2 meters (folded in half)
complex 1,5m x 100m_x000D_ _x000D_ the COMPLEX mesh integrates the drainage mesh, the perforated film and even the Peel Ply, and saves time, resin and effort in separating the consumables from the finished piece.
Flowmesh is a perfect drain mesh for learning, thanks to its flexibility and ease of application. It comes with black weft threads that indicate the optimal resin flow direction. Thanks to its great flexibility, it is the most recommended mesh for small surfaces with complicated, angular areas.
Apply the Peel ply to the entire surface you want to separate from the fiberglass / carbon and other consumables.
Sealing tape for the vacuum bag, 15 meter roll, ideal for resin infusion, vacuum compaction and sealing all joints, from the bag to the pump, through the resin trap.
Sealing tape for the vacuum bag, 15 meter roll, ideal for resin infusion, vacuum compaction and sealing all joints, from the bag to the pump, through the resin trap.
Polyester resin for laminates and laminated with fiberglass. Low emission of styrene for less irritating odors, good adhesion and comfort of use. For all types of parts and general use.
200gr / m2 twill 3K carbon fiber fabric
155mm long wooden sticks for mixing all types of resins. Pack of 25 units
Low density polyethylene spiral, for resin distribution in an infusion system.
500gr / m2 Roving fiberglass fabric Format 1m2 (125x80cm) ideal for work with polyester resin or epoxy resin
150gr / m2 absorption blanket
Bag for infusion or vacuum. 50 microns, orange, 30cm width (tubular)._x000D_
