RESINECO presents the range of products for laminates using vacuum and infusion techniques. Under the own brand INFUVAC you will find all the necessary consumables to obtain pieces with an exceptional professional finish.
The advantages of this type of technique are:
Quality of the final piece impossible to obtain by manual/wet impregnation method.
Less resin used and minimum emissions of harmful vapors to the user during the impregantion and curing process
The air bubbles in the laminate are avoided and their mechanical properties are increased
Lowered weight of the finished piece.
Clean and tidy Workstation.
Do not work with the resin directly.
The savings of resin and rollers / brushes and the result of the final piece, compensate the expenses of consumables (bag, mesh ...)
It can be used to create or repair resin parts with glass, carbon or kevlar reinforcement fibers.
Selection of consumables for the resin infusion technique, in composites with epoxy resins, closed mold with vacuum bag.
Selection of materials for the vacuum compaction technique, in a sealed bag. Retail sale of all the consumables necessary for achieving the best results
The vacuum bag is the basic element for pressure and vacuum. The bag compacts the laminate and improve the interlaminar adhesion. By extracting the air is possible to avoid loopholes without resin. Normally the bag is opened by 3 of the 4 ends and closes with the sealing compound or "tacky tape"
hoses and necessary to distribute the resin and facilitate the air outlet valves. For medium and small size, 12mm hoses outside and inside 10mm are used, with all necessary valves. and for the distribution of the resin within an infusion system spiral tube and the pyramids connection it is needed. Pay special attention if the system requires high temperature hoses for vacuum.
Soric and other foams for vacuum aid process with composite resins. Suitable for sandwich panels construction with fiberglass or carbonfiber.
In our selection for vacuum equipment, we seek the balance between price, performance and dimension of the equipment, oriented to small workshops, entrepreneurs, fans and individuals.
Our goal is to offer a package that allows you to learn, make pieces with the highest quality, but at a very tight cost.
They are not intended to run large infusion projects, which because of their complexity are not within the reach of individuals, but you can find equipments suitable for starting, learning and making pieces of small and medium size.
Contact with us if you are interested in a demonstration or more detailed explanation of how it works
Empty pump for composites 42L / MIN 15 micron. Mini high performance vacuum pump. Maximum vacuum of 15 micron with a capacity of 42 liters per minute, ideal for small and medium pieces, up to 2m2
TEFLON TAPE 12MX12MMX0.075MM (UD) sealing gasket to seal all vacuum connections
Basic consumables set to make your first resin infusion or a small project or repair. materials for 1m2
weighing scale of 5 kg, precision 1 gram. Ideal for weighing and correctly dosing all resins.
The easiest and most economical solution to have an effective resin trap
SR 8100 epoxy resin with SD 8824 hardener (Standard) specific for resin infusion.
Central control unit to connect the vacuum gauge, stopcocks or outputs
150gr / m2 absorption blanket
Apply the Peel ply to the entire surface you want to separate from the fiberglass / carbon and other consumables.
Useful part to divide the resin distribution circuit in the infusion
Perforated Polyethylene film that detaches from most resin systems - for infusion and vaccuum works
To seal any of the aluminum distributor outlets, remember to apply Teflon tape to all threads to be able to perform the infusion perfectly.
Bag for infusion or vacuum. 50 microns, orange, 30cm width (tubular)._x000D_
Large vacuum gauge (63mm) to accurately measure the level of vacuum in the bag during infusion or vacuum compaction.
mesh tube mesh Yb1 infusion input
The key that allows to open and close the vacuum circuit in the infusion
complex 1,5m x 100m_x000D_ _x000D_ the COMPLEX mesh integrates the drainage mesh, the perforated film and even the Peel Ply, and saves time, resin and effort in separating the consumables from the finished piece.
Flowmesh is a perfect drain mesh for learning, thanks to its flexibility and ease of application. It comes with black weft threads that indicate the optimal resin flow direction. Thanks to its great flexibility, it is the most recommended mesh for small surfaces with complicated, angular areas.
Transparent epoxy for fiberglass. Its medium viscosity and adherence is perfect to manufacture and repair of laminates. It has very good UV stability
Sealing tape for the vacuum bag, 15 meter roll, ideal for resin infusion, vacuum compaction and sealing all joints, from the bag to the pump, through the resin trap.
Standard epoxy resin for laminates with fiberglass, carbon fiber, coating of portrex (expanded polystyrene). Thanks to its medium viscosity and fast drying it is widely used for all types of repairs, molds and final piece.
Vacuum bag for infusion or vacuum. 65 microns, blue, width 2 meters (folded in half)
