Hoses
hoses and necessary to distribute the resin and facilitate the air outlet valves. For medium and small size, 12mm hoses outside and inside 10mm are used, with all necessary valves. and for the distribution of the resin within an infusion system spiral tube and the pyramids connection it is needed. Pay special attention if the system requires high temperature hoses for vacuum.
1M2 INFUSION INITIATION KIT
€27.14
Availability:
16 In Stock
Basic consumables set to make your first resin infusion or a small project or repair. materials for 1m2
HOSE 6-9MM 1 ML
€2.20
Availability:
85 In Stock
Suitable for small vacuum systems, it saves resin by having a smaller inside diameter.
HOSE CLAMP (UD)
€15.13
Availability:
4 In Stock
Jaw / Pliers to close the passage of resin or air in the resin infusion system for composites. Total hose tightness quickly and easily.
12MM PYRAMID - INFUSION (UD)
€15.73
Availability:
Out of stock
Pyramid for infusion, for 12 mm hose To connect the distribution system with a resin inlet and outlet hose. Made of high density polyethylene.,
PLASTIC T OUT 6MM (UD)
€1.94
Availability:
Out of stock
Useful part to divide the resin distribution circuit in the infusion
12MM ML SPIRAL TUBE
€0.82
Availability:
865 In Stock
Low density polyethylene spiral, for resin distribution in an infusion system.
