10X12MM 60ºC infusion hose
(a modificar al mòdul de reassegurances del client)
(a modificar al mòdul de reassegurances del client)
(a modificar al mòdul de reassegurances del client)
10X12MM 60ºC infusion hose
Suitable for small vacuum systems, it saves resin by having a smaller inside diameter.
Jaw / Pliers to close the passage of resin or air in the resin infusion system for composites. Total hose tightness quickly and easily.
Low density polyethylene spiral, for resin distribution in an infusion system.
SR 8100 epoxy resin with SD 8824 hardener (Standard) specific for resin infusion.
mesh tube mesh Yb1 infusion input
Vacuum bag for infusion or vacuum. 65 microns, blue, width 2 meters (folded in half)
Large vacuum gauge (63mm) to accurately measure the level of vacuum in the bag during infusion or vacuum compaction.
Removable glass / carbon fiber sealant. It does not affect the mechanical properties of the infused piece
SR 8100 epoxy resin with SD 8824 hardener (Standard) specific for resin infusion.
Flowmesh is a perfect drain mesh for learning, thanks to its flexibility and ease of application. It comes with black weft threads that indicate the optimal resin flow direction. Thanks to its great flexibility, it is the most recommended mesh for small surfaces with complicated, angular areas.
10X12MM 60ºC infusion hose
