SR 8100 epoxy resin with SD 8824 hardener (Standard) specific for resin infusion.
(a modificar al mòdul de reassegurances del client)
(a modificar al mòdul de reassegurances del client)
(a modificar al mòdul de reassegurances del client)
SR 8100 epoxy resin with SD 8824 hardener (Standard) specific for resin infusion.
Vacuum bag for infusion or vacuum. 65 microns, blue, width 2 meters (folded in half)
Flowmesh is a perfect drain mesh for learning, thanks to its flexibility and ease of application. It comes with black weft threads that indicate the optimal resin flow direction. Thanks to its great flexibility, it is the most recommended mesh for small surfaces with complicated, angular areas.
Suitable for small vacuum systems, it saves resin by having a smaller inside diameter.
Apply the Peel ply to the entire surface you want to separate from the fiberglass / carbon and other consumables.
Sealing tape for the vacuum bag, 15 meter roll, ideal for resin infusion, vacuum compaction and sealing all joints, from the bag to the pump, through the resin trap.
Low density polyethylene spiral, for resin distribution in an infusion system.
Release agent by silicone oil spray, highly recommended to facilitate subsequent reproduction in silicone molds,
Standard epoxy resin for laminates with fiberglass, carbon fiber, coating of portrex (expanded polystyrene). Thanks to its medium viscosity and fast drying it is widely used for all types of repairs, molds and final piece.
3K carbon fiber fabric of 200gr / m2
To seal any of the aluminum distributor outlets, remember to apply Teflon tape to all threads to be able to perform the infusion perfectly.
TEFLON TAPE 12MX12MMX0.075MM (UD) sealing gasket to seal all vacuum connections
Medium weight. versatile for molds and repairs of all kinds. The most common fiber for polyester resin.
CARBON HYBRID FABRIC WITH ARAMIDA 73210 SARGA 2x2 210GR / M2 x 122CM K58170
SR 8100 epoxy resin with SD 8824 hardener (Standard) specific for resin infusion.
