The easiest and most economical solution to have an effective resin trap
(a modificar al mòdul de reassegurances del client)
(a modificar al mòdul de reassegurances del client)
(a modificar al mòdul de reassegurances del client)
The easiest and most economical solution to have an effective resin trap
Suitable for small vacuum systems, it saves resin by having a smaller inside diameter.
Pyramid for infusion, for 12 mm hose To connect the distribution system with a resin inlet and outlet hose. Made of high density polyethylene.,
Central control unit to connect the vacuum gauge, stopcocks or outputs
SR 8100 epoxy resin with SD 8824 hardener (Standard) specific for resin infusion.
Apply the Peel ply to the entire surface you want to separate from the fiberglass / carbon and other consumables.
Central control unit to connect the vacuum gauge, stopcocks or outputs
Removable glass / carbon fiber sealant. It does not affect the mechanical properties of the infused piece
Perforated Polyethylene film that detaches from most resin systems - for infusion and vaccuum works
Sealing tape for the vacuum bag, 15 meter roll, ideal for resin infusion, vacuum compaction and sealing all joints, from the bag to the pump, through the resin trap.
Vacuum bag for infusion or vacuum. 65 microns, blue, width 2 meters (folded in half)
Jaw / Pliers to close the passage of resin or air in the resin infusion system for composites. Total hose tightness quickly and easily.
To seal any of the aluminum distributor outlets, remember to apply Teflon tape to all threads to be able to perform the infusion perfectly.
The easiest and most economical solution to have an effective resin trap
