Silicone for molds, also known as Silicone RTV (Room Temperature Vulcanization) is a fluid paste that hardens through the action of a catalyst. In this way we obtain a flexible material with unique non-stick properties, which will facilitate the reproduction of multiple parts with total security and tranquility *.
Depending on the mechanical needs of the mold, it is advisable to use a silicone or another.
Standard silicones (Condensation or Addition), Silicone for large molds applied by "thixo" layers, silicone for metal that supports up to 350ºc (lead, tin, low melting point alloys) and silicone for food contact.
Standard mold silicone for application for casting. Thanks to its low viscosity, it guarantees a high degree of detail and a medium durability. Flexible and easy to release moulds.
Big / Vertical moulds. This silicone it is designed for vertical applications due to its high viscosity and good strength.
You need the THIX additive to adapt the viscosity of the silicone
Silicone for molds with a characteristic red color that gives it a special load that gives it very high properties in relation to resistance to high temperatures. This property makes it an ideal silicone for molds where you need to apply metals of the low melting point category (max 350ºC). Lead, Pewter,...
Food silicone addition for all types of reproductions. Shore 40. Specially formulated with raw materials that allow this silicone to be used for the preparation of molds in which food must be cast (chocolate, jellies, Custards ...). You can go to the freezer and withstand temperatures in the oven up to 200 º C.
RESINECO sells the silicone catalysts with a blue pigment incorporated so that the correct mixing of all the material is very visible and thus ensure that no parts of the silicone remain unreacted.
The silicone catalysts might contain toxic salts and should be handled with caution. Check the safety data sheet before use.
Powder, which when mixed with water in the correct proportions, and by means of a chemical reaction, produces a mass that is capable of reproducing in a negative a model.
May be in contact with skin
Silicone RTV (Room Temperature Vulcanization) of high viscosity (thixotropic) special for large molds applied by layers. Requires THIX additive to control viscosity.
RTV (Room Temperature Vulcanization) silicone for low melting metal casting. Recommended for casting lead and tin or bismuth alloys. ShoreA60
Solution to modify the viscosity of RTV silicones. Especially recommended for SILTHIXO silicone. Save time and silicone.
RTV (Room Temperature Vulcanization) Silicone Standard for all types of fast, flexible and non-stick molds.
_x000D_
NEW FORMULA, BETTER STRENGTH RESISTANCE, TO GET MORE COPIES FROM A MOLD
Addition Silicone (platinum), more durability over time and greater tear resistance. Recommended for many copies or prototyping. The best Resineco silicone
Silicone catalyst for RTV molds, with blue pigment or without as an indicator of homogeneous mixing w
Silicone for all types of reproductions. ShoreA 40. Specially formulated for food applications.
weighing scale of 5 kg, precision 1 gram. Ideal for weighing and correctly dosing all resins.
Release agent by silicone oil spray, highly recommended to facilitate subsequent reproduction in silicone molds,
Alginate is a material for quick molds, with water and suitable for reproductions of body parts since it is not toxic and can be in direct contact with the skin.
Vaseline paste to be used as a release agent between silicone and silicone, or to isolate clay or plaster in molds with other resins
155mm long wooden sticks for mixing all types of resins. Pack of 25 units
Powerful and environmentally friendly detergent. Safe for cleaning all types of molds. Removes residues of JESMONITE, pigments, glitters, metallic powders, from the mold.
