Jesmonite AC200 shares all the same attributes as AC100, however it is designed as a casting or coating compound that can be carved after it has set. AC200 can be cast into a range of moulding compounds, and the resulting material displays remarkable carving and machining properties.
It has excellent adhesive properties allowing thick layers to be built up onto many substrates such as carved foams and then re-worked to produce fine detail. It is also possible to put a durable hard coat of AC100 over the carved surface or object if required.
AC200 is supplied in separate containers of liquid and powder, and is mixed at a ratio of 2 parts AC200 powder to 1 part AC200 liquid by weight. It is also fully compatible with the Jesmonite range of ancillary products including Pigments, Glass Reinforcements, & Thixotrope.
AC200 is a Jesmonite resin solution to obtain a soft compound that can be carved, milled or machined. Ideal for models and prototypes for sculptors and designers
Mixing blades for acrylic resins 65 / 35 mm. Thanks to its design, prevents the formation of bubbles and achieve a homogeneous mixture in a few seconds. It adapts easily to any standard drill.
60x40cm silicone mat, ideal for working with any resin and easy to clean.
Case with all the official Jesmonite pigments in 10gr presentation, for AC100, AC300 and AC84
includes:
2 x 10g Black
2 x 10g White
1 x 10g Bright Yellow
1 x 10g Oxide Yellow
1 x 10g Orange
1 x 10g Terracotta
1 x 10g Coade (coffee)
1 x 10g Green
1 x 10g Blue
1 x 10g Purple
1 x 10g Pink
1 x 10g Bright Red
1 x 10g Oxide Red
155mm long wooden sticks for mixing all types of resins. Pack of 25 units
Case with 10 official Jesmonite pigments in 50gr presentation, for AC100, AC300 and AC84
includes:
1 x 50g Black
1 x 50g White
1 x 50g Bright Yellow
1 x 50g Oxide Yellow
1 x 50g Terracotta
1 x 50g Coade (coffee)
1 x 50g Green
1 x 50g Blue
1 x 50g Bright Red
1 x 50g Oxide Red
