Jesmonite AC730 is a rapid setting acrylic modified cementitious composite. The system is designed for glass reinforced decorative structures, and can also be used for small castings (see Technical Data sheet TDS730). It is shrinkage compensated material of low permeability and is durable in all conditions of external weathering including water features. The compound has a reduced free-lime content, and is of low alkalinity, leading to major reductions in efflorescence in comparison with ordinary Portland cement systems. The material contains a fine decorative aggregate and powder pigments, carefully controlled to give a consistent decorative surface finish after treatment with a proprietary brick cleaner or acid etch.
AC730 is available in six stone finishes; Natural, Bathstone, Yellow Sandstone, White Marble, Portland, and Silver Grey Granite. RESINECO offers a bespoke matching service to assist Manufacturers, Architects, and Designers to match any colour scheme and surface finish.
AC730 is the ideal resin for fiberglass reinforced decorative moldings. Ornaments and all kinds of sculptures. It is a suitable outdoor material. Available in a wide range of stone finishes. It can be used for small castings although its best performance is in laminated with fiberglass.
Acid Etch is used to expose the fine decorative aggregate in Jesmonite AC730 materials. Removes the cement rich film from the surface
Retardant for the Jesmonite AC730 and AC730 FLEX resin. Recommended ratio of 2 to 8 grs per kg of mixture.
Mixing blades for acrylic resins 65 / 35 mm. Thanks to its design, prevents the formation of bubbles and achieve a homogeneous mixture in a few seconds. It adapts easily to any standard drill.
Resin application kit, either polyester, epoxy or jesmonite that includes:
Buy the Liquid of the Jesmonite AC7300 stone resin separately, in the format you need, either because you have missed it or because you make a different mixture than the recommended one to achieve different results.
Buy the base of the Jesmonite AC730 stone resin separately, in the format you need, either because you have missed it or because you make a different mixture than recommended to achieve different results.
60x40cm silicone mat, ideal for working with any resin and easy to clean.
Case with all the official Jesmonite pigments in 10gr presentation, for AC100, AC300 and AC84
includes:
2 x 10g Black
2 x 10g White
1 x 10g Bright Yellow
1 x 10g Oxide Yellow
1 x 10g Orange
1 x 10g Terracotta
1 x 10g Coade (coffee)
1 x 10g Green
1 x 10g Blue
1 x 10g Purple
1 x 10g Pink
1 x 10g Bright Red
1 x 10g Oxide Red
155mm long wooden sticks for mixing all types of resins. Pack of 25 units
Powerful and environmentally friendly detergent. Safe for cleaning all types of molds. Removes residues of JESMONITE, pigments, glitters, metallic powders, from the mold.
The vibrating platform is a great help to remove bubbles in the moulds, achieve a homogeneous mixture and improve the result of all your pieces with Jesmonite.
Jesmonite AC84 is a two-component, water-based acrylic resin, perfect for creating stone-like pieces from molds. Known for its high durability and precise detail reproduction, it offers a realistic stone finish without the heavy weight. Easy to use, customizable with pigments, and safe, as it emits no toxic fumes. Ideal for sculptors, designers, and creators of artistic and decorative pieces.
Case with 10 official Jesmonite pigments in 50gr presentation, for AC100, AC300 and AC84
includes:
1 x 50g Black
1 x 50g White
1 x 50g Bright Yellow
1 x 50g Oxide Yellow
1 x 50g Terracotta
1 x 50g Coade (coffee)
1 x 50g Green
1 x 50g Blue
1 x 50g Bright Red
1 x 50g Oxide Red
