Buy the Liquid of the Jesmonite AC7300 stone resin separately, in the format you need, either because you have missed it or because you make a different mixture than the recommended one to achieve different results.
(a modificar al mòdul de reassegurances del client)
(a modificar al mòdul de reassegurances del client)
(a modificar al mòdul de reassegurances del client)
Buy the Liquid of the Jesmonite AC7300 stone resin separately, in the format you need, either because you have missed it or because you make a different mixture than the recommended one to achieve different results.
Mixing blades for acrylic resins 65 / 35 mm. Thanks to its design, prevents the formation of bubbles and achieve a homogeneous mixture in a few seconds. It adapts easily to any standard drill.
Buy the base of the Jesmonite AC730 stone resin separately, in the format you need, either because you have missed it or because you make a different mixture than recommended to achieve different results.
Retardant for the Jesmonite AC730 and AC730 FLEX resin. Recommended ratio of 2 to 8 grs per kg of mixture.
Acrylic pigment for Jesmonite resin. It is applied to a maximum of 2% by weight. With the AC100 resin the most vivid colors are obtained by having a higher acrylic resin content.
Pigments are sold by weight and each color has a different density, so for some colors it may appear that the bottle is only half full. Especially white, oxides and terracotta.
The specific fiberglass for Jesmonite AC100 and AC730 resins. This type of glass reinforcement has been custom designed for use with Jesmonite. Very easy to adapt and work. Flame retardant
Silicone stick for mixing all types of resins. Very easy to clean and reuse to avoid residue.
Structural filler of cut fiberglass chopped strands. To reinforce resins of polyester, epoxy and acrylic resin Jesmonite.
Thixotropic thickener additive for resin references Jesmonite AC100, AC200, AC300. So you don't pick up. Save time and material. Recommended mixing ratio of 2 to 6 grams per kg of mixture.
Buy the Liquid of the Jesmonite AC100 resin separately, in the format you need, either because you have missed it or because you make a different mixture than the recommended one to achieve different results.
Retardant for the Jesmonite AC730 and AC730 FLEX resin. Recommended ratio of 2 to 8 grs per kg of mixture.
Resin indicated for uses in which adhesion to expanded polystyrene "porex" / "white cork" is required as it does not attack or undo it. Ideal for scenographies, sets and labels.
AC300 is the solution for castings and castings of acrylic resin in mold, to obtain solid pieces with a lower cost than AC100. You can do casting of any size.
Mixing blades for acrylic resins 65 / 35 mm. Thanks to its design, prevents the formation of bubbles and achieve a homogeneous mixture in a few seconds. It adapts easily to any standard drill.
AC730 is the ideal resin for fiberglass reinforced decorative moldings. Ornaments and all kinds of sculptures. It is a suitable outdoor material. Available in a wide range of stone finishes. It can be used for small castings although its best performance is in laminated with fiberglass.
Buy the Liquid of the Jesmonite AC7300 stone resin separately, in the format you need, either because you have missed it or because you make a different mixture than the recommended one to achieve different results.
