Acrylic pigment for Jesmonite resin. It is applied to a maximum of 2% by weight. With the AC100 resin the most vivid colors are obtained by having a higher acrylic resin content.
Pigments are sold by weight and each color has a different density, so for some colors it may appear that the bottle is only half full. Especially white, oxides and terracotta.
(a modificar al mòdul de reassegurances del client)
(a modificar al mòdul de reassegurances del client)
(a modificar al mòdul de reassegurances del client)
We recommend to use original Jesmonite pigments, as their high pigment concentration means very little is needed to achieve the desired color.
Tips for Jesmonite pigments:
To achieve a pure black, always calculate 2% of the total mix weight; otherwise, gray tones often appear when the Jesmonite dries.
If you are inexperienced with pigments, it is recommended to first tint the liquid, mixing several colors if necessary, and once the desired color is achieved, add the powder (AC BASE). Once everything is mixed, the tone can be corrected by adding more pigments.
How to achieve perfect blends with Jesmonite pigment?
To achieve smooth mixtures without lumps or white spots, we recommend using the Jesmonite MIXING BLADE.
How do I store Jesmonite pigments?
A good way to keep your pigments in perfect condition is to shake them regularly to ensure you always use the perfect mix/concentration. Some colors, due to their solid pigment formulation, tend to clump at the bottom of the container. Remember to shake them regularly, and of course, always before use.
Important note:
The green pigment is much thicker than others; if you have difficulty with green, it's much better to use yellow and blue.
Jesmonite AC100 is the ideal resin to give life to your creativity. It is an alternative to polyester or polyurethane for all kinds of decorative pieces. Ideal with silicone molds.
AC300 is the solution for castings and castings of acrylic resin in mold, to obtain solid pieces with a lower cost than AC100. You can do casting of any size.
Oval silicone mold 17.5 cm long and 9 cm wide
Ideal for resin reproductions of all kinds, especially epoxy and Jesmonite.
Case with all the official Jesmonite pigments in 10gr presentation, for AC100, AC300 and AC84
includes:
2 x 10g Black
2 x 10g White
1 x 10g Bright Yellow
1 x 10g Oxide Yellow
1 x 10g Orange
1 x 10g Terracotta
1 x 10g Coade (coffee)
1 x 10g Green
1 x 10g Blue
1 x 10g Purple
1 x 10g Pink
1 x 10g Bright Red
1 x 10g Oxide Red
155mm long wooden sticks for mixing all types of resins. Pack of 25 units
4Pack that includes everything you need to start working with JESMONITE AC100:
Jesmonite, 1 silicone mold, and pigments
60x40cm silicone mat, ideal for working with any resin and easy to clean.
AC730 Flex Metal is the best solution to obtain metal effect in pieces from silicone mold with Jesmonite resin. Get the effect and behavior of the metal. Alternative to cast copper, bronze, silver or brass. select the finish and format you need
Retardant for the Jesmonite AC730 and AC730 FLEX resin. Recommended ratio of 2 to 8 grs per kg of mixture.
Mineral pigments with neon-colored base. Perfect for use with Jesmonite AC100/AC200/AC300. You can give free rein to your creativity with really bright colors (neon effect).
Please note: does not light up in the dark! No fluorescent pigments.
Acrylic sealant for Jesmonite to protect parts made with Jesmonite AC100, AC200 and AC300.
Powerful and environmentally friendly detergent. Safe for cleaning all types of molds. Removes residues of JESMONITE, pigments, glitters, metallic powders, from the mold.
Clear polyester resin for casting. Great transparency For encapsulation, occlusion, imitation glass and translucent decorative objects
Case with 10 official Jesmonite pigments in 50gr presentation, for AC100, AC300 and AC84
includes:
1 x 50g Black
1 x 50g White
1 x 50g Bright Yellow
1 x 50g Oxide Yellow
1 x 50g Terracotta
1 x 50g Coade (coffee)
1 x 50g Green
1 x 50g Blue
1 x 50g Bright Red
1 x 50g Oxide Red
Acrylic pigment for Jesmonite resin. It is applied to a maximum of 2% by weight. With the AC100 resin the most vivid colors are obtained by having a higher acrylic resin content.
Pigments are sold by weight and each color has a different density, so for some colors it may appear that the bottle is only half full. Especially white, oxides and terracotta.
