Polyester Resins

Catalyst for polyester resins and gelcoats. Usual ratio 1.25 to 2%. Always consult the resin technical data sheet.

Resin indicated for uses in which adhesion to expanded polystyrene "porex" / "white cork" is required as it does not attack or undo it. Ideal for scenographies, sets and labels.

Clear polyester resin for casting. Great transparency For encapsulation, occlusion, imitation glass and translucent decorative objects

Polyester resin for casting of any size, without pre-accelerating. Cobalt Octoate and MEK must be added depending on the size of the casting.

Polyester resin for laminates and laminated with fiberglass. Low emission of styrene for less irritating odors, good adhesion and comfort of use. For all types of parts and general use.

Polyester putty, to refine details, rectify molds and repair fiberglass laminates with resin. 330 gr format

It is a highly flexible polyester putty, specially designed for repairing plastics, polyester parts, and fiberglass. Ideal for repairing small defects and scratches on bumpers.

Concentrated color transparent pigment. It gives color to the piece and maintains transparency. UV resistant.

Cobalt Octoate is a solution that is used to modify the cure time of polyester resins.

Styrene monomer with 5% paraffin addition. To remove the mordant of polyester resins. Turn a Gel-Coat into a Top-Coat or to surfboard glaze.

Usual filler for casting polyester resin. Increase the volume of the resin, gives mechanical properties. Reduce the exotherm of the resin and reduce the cost of the final piece.

Resin application kit, either polyester, epoxy or jesmonite that includes:

SOFT FINE multi-function is a multi-functional polyester filler that can be applied with excellent adhesion to steel, electro-galvanized, galvanized, or aluminum sheets. It stands out for its excellent sandability and ease of application, thanks to its creamy consistency and fine texture. Furthermore, it can be used both as a filler and a finishing filler. Another key feature of this filler is its suitability for use in the marine sector.

Glitter chips are fine like sand, also a little coarser up to about 3mm and can be mixed excellently with Jesmonite or other resins. Glitter chips give your creation an elegant and attractive final result!

Perfect for use with JESMONITE AC100

Size 30gr

Colored pigmented paste for polyester or epoxy resins. For opaque and sun resistant colors. Very stable color, does not vary during resin drying.

Medium weight. versatile for molds and repairs of all kinds. The most common fiber for polyester resin.

Transparent resin for surfboards. Medium viscosity and fast cure. Specific for surfboards and nautical. Very fast drying, good UV resistance.

Aerosil or Cabosil, are trademarks of the same product. It is an additive to increase the viscosity of epoxy resins, polyester and other fluids. 350 grs format. Its main component is "Pyrogenic Silica"

It is a lightweight, multifunctional polyester filler for repairing all types of car bodies. Its advantage over conventional fillers is its excellent adhesion to galvanized coatings used on car bodies, as well as to aluminum. It is easy to apply, dries quickly, and, above all, is easy to sand, allowing you to start sanding with P120 grit sandpaper. It leaves no pores.

The silver flakes are so fine and soft and can be mixed excellently with Jesmonite or other resins. get an elegant and eye-catching final result!

Perfect for use with JESMONITE AC100

Format 5 gr

155mm long wooden sticks for mixing all types of resins. Pack of 25 units

Pure metal filler for Jesmonite resins. 99,9% of metal powder to achieve amazing real metal effects.

weighing scale of 5 kg, precision 1 gram. Ideal for weighing and correctly dosing all resins.

FIBERPLAST fibreglass is a polyester body filler reinforced with fibreglass for stronger resistance. Suitable to repair polyester parts and areas with metal rust. The size of the fibre particles allow an easy application.