Botiga online especialitzada en resina epoxi, polièster i composites
English GB
Botiga online especialitzada en resina epoxi, polièster i composites
Pure metal filler for Jesmonite resins. 99,9% of metal powder to achieve amazing real metal effects.
24/48 h Shipping
Secure payment
Easy returns
filler for Jesmonite resins. It contains authentic metal particles that provide a spectacular finish as well as the particles on the surface are clearly seen.
* It can also be used with polyester resins
Resin application kit, either polyester, epoxy or jesmonite that includes:
Jesmonite AC100 is the ideal resin to give life to your creativity. It is an alternative to polyester or polyurethane for all kinds of decorative pieces. Ideal with silicone molds.
AC300 is the solution for castings and castings of acrylic resin in mold, to obtain solid pieces with a lower cost than AC100. You can do casting of any size.
Polyester resin for laminates and laminated with fiberglass. Low emission of styrene for less irritating odors, good adhesion and comfort of use. For all types of parts and general use.
Polyester resin for casting of any size, without pre-accelerating. Cobalt Octoate and MEK must be added depending on the size of the casting.
Structural filler of cut fiberglass chopped strands. To reinforce resins of polyester, epoxy and acrylic resin Jesmonite.
Abrasive nylon fiber wheel for sanding jesmonite metal surfaces. It can be used on flat and irregular interior surfaces. 6mm shank Compatible with most electric drills.
The silver flakes are so fine and soft and can be mixed excellently with Jesmonite or other resins. get an elegant and eye-catching final result!
Perfect for use with JESMONITE AC100
Format 5 gr
Glitter chips are fine like sand, also a little coarser up to about 3mm and can be mixed excellently with Jesmonite or other resins. Glitter chips give your creation an elegant and attractive final result!
Perfect for use with JESMONITE AC100
Size 30gr
155mm long wooden sticks for mixing all types of resins. Pack of 25 units
AC730 Flex Metal is the best solution to obtain metal effect in pieces from silicone mold with Jesmonite resin. Get the effect and behavior of the metal. Alternative to cast copper, bronze, silver or brass. select the finish and format you need
Jesmonite AC84 is a two-component, water-based acrylic resin, perfect for creating stone-like pieces from molds. Known for its high durability and precise detail reproduction, it offers a realistic stone finish without the heavy weight. Easy to use, customizable with pigments, and safe, as it emits no toxic fumes. Ideal for sculptors, designers, and creators of artistic and decorative pieces.
Brush with wooden handle for all types of work with polyester resins, acrylic resins and paints._x000D_ _x000D_ Format: 1 unit
Case with 10 official Jesmonite pigments in 50gr presentation, for AC100, AC300 and AC84
includes:
1 x 50g Black
1 x 50g White
1 x 50g Bright Yellow
1 x 50g Oxide Yellow
1 x 50g Terracotta
1 x 50g Coade (coffee)
1 x 50g Green
1 x 50g Blue
1 x 50g Bright Red
1 x 50g Oxide Red
RTV (Room Temperature Vulcanization) Silicone Standard for all types of fast, flexible and non-stick molds.
_x000D_
NEW FORMULA, BETTER STRENGTH RESISTANCE, TO GET MORE COPIES FROM A MOLD
Solution to modify the viscosity of RTV silicones. Especially recommended for SILTHIXO silicone. Save time and silicone.
Buy here the base of the Jesmonite AC100 resin separately, in the format you need, either because you have missed it or because you make a different mixture than recommended to achieve different results. Select the size according to your need
Glitter chips are fine like sand, also a little coarser up to about 3mm and can be mixed excellently with Jesmonite or other resins. Glitter chips give your creation an elegant and attractive final result!
Perfect for use with JESMONITE AC100
Size 30gr
Pure metal filler for Jesmonite resins. 99,9% of metal powder to achieve amazing real metal effects.
Català
Español
