POLYESTER RESIN CATALYST

Styrene Monomer 1 liter, solvent for polyester resins and gel-coats. to modify viscosity or general cleaning.

Usual filler for casting polyester resin. Increase the volume of the resin, gives mechanical properties. Reduce the exotherm of the resin and reduce the cost of the final piece.

Cobalt Octoate is a solution that is used to modify the cure time of polyester resins.

Styrene monomer with 5% paraffin addition. To remove the mordant of polyester resins. Turn a Gel-Coat into a Top-Coat or to surfboard glaze.

weighing scale of 5 kg, precision 1 gram. Ideal for weighing and correctly dosing all resins.

CONSUMABLES KIT SP (ANCILLARY KIT)

Glass microspheres filler for the production of putties, filleting and reinforcement of polyester and epoxy resins.

Aerosil or Cabosil, are trademarks of the same product. It is an additive to increase the viscosity of epoxy resins, polyester and other fluids. 350 grs format. Its main component is "Pyrogenic Silica"

Flexible polyester resin, with low reactivity and medium viscosity, for blends with standard resin and flexible polyester resins.

Polyester resin for casting of any size, without pre-accelerating. Cobalt Octoate and MEK must be added depending on the size of the casting.

Styrene monomer with 5% paraffin addition. To remove the mordant of polyester resins. Turn a Gel-Coat into a Top-Coat or to surfboard glaze.

200gr / m2 twill 3K carbon fiber fabric

Silicone RTV (Room Temperature Vulcanization) of high viscosity (thixotropic) special for large molds applied by layers. Requires THIX additive to control viscosity.

Thick weight. For repairs that require thickness, or a large number of layers. It can also be combined with finer weights or in some cases with 500gr Roving for maximum strength. Valid for polyester or epoxy

Cobalt Octoate is a solution that is used to modify the cure time of polyester resins.

Silicone stick for mixing all types of resins. Very easy to clean and reuse to avoid residue.