Botiga online especialitzada en resina epoxi, polièster i composites
English GB
Botiga online especialitzada en resina epoxi, polièster i composites
Resin indicated for uses in which adhesion to expanded polystyrene "porex" / "white cork" is required as it does not attack or undo it. Ideal for scenographies, sets and labels.
24/48 h Shipping
Secure payment
Easy returns
Resin indicated for uses in which adhesion to expanded polystyrene "porex" / "white cork" is required as it does not attack or undo it. Ideal for scenographies, sets and labels.
Aerosil or Cabosil, are trademarks of the same product. It is an additive to increase the viscosity of epoxy resins, polyester and other fluids. 350 grs format. Its main component is "Pyrogenic Silica"
Resin application kit, either polyester, epoxy or jesmonite that includes:
Fine weight, ideal for parts with many corners or corners that are difficult to adapt. Valid for polyester or epoxy.
Cobalt Octoate is a solution that is used to modify the cure time of polyester resins.
Thinner fiber for first layer or reinforced gelcoats. Low resin consumption, very useful to reach every corner. It is also suitable for use with Jesmonite resin.
155mm long wooden sticks for mixing all types of resins. Pack of 25 units
Resin application kit, either polyester, epoxy or jesmonite that includes:
Release agent in spray bottle. Suitable for polyester, epoxy resins, PMMA and polyurethanes.
Acrylic pigment for Jesmonite resin. It is applied to a maximum of 2% by weight. With the AC100 resin the most vivid colors are obtained by having a higher acrylic resin content.
Pigments are sold by weight and each color has a different density, so for some colors it may appear that the bottle is only half full. Especially white, oxides and terracotta.
Polyester gel-coat with paraffin (Top-Coat), for brush or roller application. Isophthalic For repairs and molds. Select Format and Color.
Solution to modify the viscosity of RTV silicones. Especially recommended for SILTHIXO silicone. Save time and silicone.
TWILL or SARGA fabric of 290 gr / m2 Format: 1 ML (width 1000mm) ideal for work with polyester resin or epoxy resin
Alginate is a material for quick molds, with water and suitable for reproductions of body parts since it is not toxic and can be in direct contact with the skin.
HEXCEL PLAIN fabric of 206 gr / m2 (6 Ounces) Format: 1 ML (650mm width) ideal for work with polyester resin or epoxy resin
Resin indicated for uses in which adhesion to expanded polystyrene "porex" / "white cork" is required as it does not attack or undo it. Ideal for scenographies, sets and labels.
Català
Español
