Botiga online especialitzada en resina epoxi, polièster i composites
English GB
Botiga online especialitzada en resina epoxi, polièster i composites
It is a highly flexible polyester putty, specially designed for repairing plastics, polyester parts, and fiberglass. Ideal for repairing small defects and scratches on bumpers.
24/48 h Shipping
Secure payment
Easy returns
Dark Gray (approx. RAL 7024)
Mixing Ratio: 100:2
Catalyst: Peroxides
Pot Life: 4-5 minutes
Drying Time at 20°C: The surface can be sanded after
approx. 20-30 minutes
The surface must be clean, dry, and free of grease. Remove any firmly adhered traces of old paint.
Do not apply to thermoplastic or acid-based paints.
Thoroughly mix the filler with the hardener.
Apply within the appropriate temperature range (no lower than +10°C).
Polyester putty spatulas, 4 units, stainless steel
Polyester putty, to refine details, rectify molds and repair fiberglass laminates with resin. 330 gr format
Structural filler of cut fiberglass chopped strands. To reinforce resins of polyester, epoxy and acrylic resin Jesmonite.
Polyester putty, to refine details, rectify molds and repair fiberglass laminates with resin. 330 gr format
SOFT FINE multi-function is a multi-functional polyester filler that can be applied with excellent adhesion to steel, electro-galvanized, galvanized, or aluminum sheets. It stands out for its excellent sandability and ease of application, thanks to its creamy consistency and fine texture. Furthermore, it can be used both as a filler and a finishing filler. Another key feature of this filler is its suitability for use in the marine sector.
FIBERPLAST fibreglass is a polyester body filler reinforced with fibreglass for stronger resistance. Suitable to repair polyester parts and areas with metal rust. The size of the fibre particles allow an easy application.
Polyester putty in 2 kg format, to refine details, rectify molds and repair fiberglass laminates with resin. Easily sandpaper Format 2 kg (includes catalyst)
Polyester putty spatulas, 4 units, stainless steel
It is a lightweight, multifunctional polyester filler for repairing all types of car bodies. Its advantage over conventional fillers is its excellent adhesion to galvanized coatings used on car bodies, as well as to aluminum. It is easy to apply, dries quickly, and, above all, is easy to sand, allowing you to start sanding with P120 grit sandpaper. It leaves no pores.
It is a highly flexible polyester putty, specially designed for repairing plastics, polyester parts, and fiberglass. Ideal for repairing small defects and scratches on bumpers.
Català
Español
