Home

Subcategories

Active filters

  • Categories: Polyester Resins
  • Categories: RTV Silicone
SILGREY

SILGREY

€23.50
Availability: 533 In Stock

RTV (Room Temperature Vulcanization) Silicone Standard for all types of fast, flexible and non-stick molds.

POLYESTER RESIN FOR FIBERGLASS

POLYESTER RESIN FOR FIBERGLASS

€12.15
Availability: 838 In Stock

Polyester resin for laminates and laminated with fiberglass. Low emission of styrene for less irritating odors, good adhesion and comfort of use. For all types of parts and general use.

SILGREY PLUS

SILGREY PLUS

€25.00
Availability: 15 In Stock

RTV (Room Temperature Vulcanization) Silicone Standard for all types of fast, flexible and non-stick molds.

_x000D_

NEW FORMULA, BETTER STRENGTH RESISTANCE, TO GET MORE COPIES FROM A MOLD

SILRED (metal)

SILRED (metal)

€25.00
Availability: 34 In Stock

RTV (Room Temperature Vulcanization) silicone for low melting metal casting. Recommended for casting lead and tin or bismuth alloys. ShoreA60

SILTHIXO (thixo)

SILTHIXO (thixo)

€25.00
Availability: 10 In Stock

Silicone RTV (Room Temperature Vulcanization) of high viscosity (thixotropic) special for large molds applied by layers. Requires THIX additive to control viscosity.

SILCLEAR 22 AB

SILCLEAR 22 AB

€49.99
Availability: 5 In Stock

Addition Silicone (platinum), more durability over time and greater tear resistance. Recommended for many copies or prototyping. The best Resineco silicone

FINE POLYESTER PUTTY 2 KG (UD)

FINE POLYESTER PUTTY 2 KG (UD)

€19.97
Availability: 8 In Stock

Polyester putty in 2 kg format, to refine details, rectify molds and repair fiberglass laminates with resin. Easily sandpaper Format 2 kg (includes catalyst)

SILSPRAY (UD)

SILSPRAY (UD)

€6.00
Availability: 40 In Stock

Release agent by silicone oil spray, highly recommended to facilitate subsequent reproduction in silicone molds,

THIX - FOR SILICONE

THIX - FOR SILICONE

€11.56
Availability: 940 In Stock

Solution to modify the viscosity of RTV silicones. Especially recommended for SILTHIXO silicone. Save time and silicone.

ALGINATE 450 GRS (UD)

ALGINATE 450 GRS (UD)

€9.95
Availability: 17 In Stock

Alginate is a material for quick molds, with water and suitable for reproductions of body parts since it is not toxic and can be in direct contact with the skin.

Vaselina pura en pasta 30 gr

Vaselina pura en pasta 30 gr

€4.24
Availability: 20 In Stock

Vaseline paste to be used as a release agent between silicone and silicone, or to isolate clay or plaster in molds with other resins

CALCIUM CARBONATE

CALCIUM CARBONATE

€4.24
Availability: 896 In Stock

Usual filler for casting polyester resin. Increase the volume of the resin, gives mechanical properties. Reduce the exotherm of the resin and reduce the cost of the final piece.

PARAFINNED STYRENE

PARAFINNED STYRENE

€11.14
Availability: 14 In Stock

Styrene monomer with 5% paraffin addition. To remove the mordant of polyester resins. Turn a Gel-Coat into a Top-Coat or to surfboard glaze.

AEROSIL 350 GR (UD)

AEROSIL 350 GR (UD)

€14.82
Availability: 37 In Stock

Aerosil or Cabosil, are trademarks of the same product. It is an additive to increase the viscosity of epoxy resins, polyester and other fluids. 350 grs format. Its main component is "Pyrogenic Silica"