Popular search terms
Botiga online especialitzada en resina epoxi, polièster i composites
- RESLIN The first 100% biodegradable resin ECO addremove
- JESMONITE addremove
- Infuvac addremove
- RTV Silicone addremove
- Epoxy resin addremove
- Polyester Resins addremove
- Gelcoats - Topcoats
- Fiberglass & Carbon addremove
- Pigments addremove
- Tools & Ancillaries addremove
- Silicone Moulds
ALUMINUM DISTRIBUTOR 4 OUTPUTS 1/4 "(UD)
Central control unit to connect the vacuum gauge, stopcocks or outputs
24/48 h Shipping
Secure payment
Easy returns
You might also like
HOSE 6-9MM 1 ML
Suitable for small vacuum systems, it saves resin by having a smaller inside diameter.
1/4 "ALLEN MALE CONICAL PLUG (UD)
To seal any of the aluminum distributor outlets, remember to apply Teflon tape to all threads to be able to perform the infusion perfectly.
RADIAL VACUOMETER 1/4 "63MM -1 BAR
Large vacuum gauge (63mm) to accurately measure the level of vacuum in the bag during infusion or vacuum compaction.
1/4 "FEMALE MALE REDUCED BALL VALVE (UD)
The key that allows to open and close the vacuum circuit in the infusion
8 other products in the same category:
RADIAL VACUOMETER 1/4 "63MM -1 BAR
Large vacuum gauge (63mm) to accurately measure the level of vacuum in the bag during infusion or vacuum compaction.
1/4 "FEMALE MALE REDUCED BALL VALVE (UD)
The key that allows to open and close the vacuum circuit in the infusion
TACKY TAPE 140ºC GRAY 15 ML (UD)
Sealing tape for the vacuum bag, 15 meter roll, ideal for resin infusion, vacuum compaction and sealing all joints, from the bag to the pump, through the resin trap.
1/4 "ALLEN MALE CONICAL PLUG (UD)
To seal any of the aluminum distributor outlets, remember to apply Teflon tape to all threads to be able to perform the infusion perfectly.
TEFLON TAPE 12MX12MMX0,075MM (UD)
TEFLON TAPE 12MX12MMX0.075MM (UD) sealing gasket to seal all vacuum connections
PLASTIC T OUT 6MM (UD)
Useful part to divide the resin distribution circuit in the infusion
12MM PYRAMID - INFUSION (UD)
Pyramid for infusion, for 12 mm hose To connect the distribution system with a resin inlet and outlet hose. Made of high density polyethylene.,
Customers who bought this product also bought:
VACUUM BAG 65MCR - 200CM (DOBLADA A 1 M) ML
Vacuum bag for infusion or vacuum. 65 microns, blue, width 2 meters (folded in half)
3K CARBON FIBER FABRIC OF 200GR / M2 120CM WIDTH
3K carbon fiber fabric of 200gr / m2
MINI RESIN TRAP
The easiest and most economical solution to have an effective resin trap
PLASTIC T OUT 6MM (UD)
Useful part to divide the resin distribution circuit in the infusion
EPOXY RESIN KIT FOR INFUSION
SR 8100 epoxy resin with SD 8824 hardener (Standard) specific for resin infusion.
1/4 "ALLEN MALE CONICAL PLUG (UD)
To seal any of the aluminum distributor outlets, remember to apply Teflon tape to all threads to be able to perform the infusion perfectly.
RADIAL VACUOMETER 1/4 "63MM -1 BAR
Large vacuum gauge (63mm) to accurately measure the level of vacuum in the bag during infusion or vacuum compaction.
WAX TR104 400 GR (UD)
Premium TR 104 high temperature wax is a high production paste formulated to work in temperature curing processes.
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Central control unit to connect the vacuum gauge, stopcocks or outputs