MINI RESIN TRAP

Removable glass / carbon fiber sealant. It does not affect the mechanical properties of the infused piece

Jaw / Pliers to close the passage of resin or air in the resin infusion system for composites. Total hose tightness quickly and easily.

Basic consumables set to make your first resin infusion or a small project or repair. materials for 1m2

Empty pump for composites 42L / MIN 15 micron. Mini high performance vacuum pump. Maximum vacuum of 15 micron with a capacity of 42 liters per minute, ideal for small and medium pieces, up to 2m2

weighing scale of 5 kg, precision 1 gram. Ideal for weighing and correctly dosing all resins.

TEFLON TAPE 12MX12MMX0.075MM (UD) sealing gasket to seal all vacuum connections

SR 8100 epoxy resin with SD 8824 hardener (Standard) specific for resin infusion.

TEFLON TAPE 12MX12MMX0.075MM (UD) sealing gasket to seal all vacuum connections

Central control unit to connect the vacuum gauge, stopcocks or outputs

Jaw / Pliers to close the passage of resin or air in the resin infusion system for composites. Total hose tightness quickly and easily.

Apply the Peel ply to the entire surface you want to separate from the fiberglass / carbon and other consumables.

Vacuum bag for infusion or vacuum. 65 microns, blue, width 2 meters (folded in half)

Sealing tape for the vacuum bag, 15 meter roll, ideal for resin infusion, vacuum compaction and sealing all joints, from the bag to the pump, through the resin trap.

Perforated Polyethylene film that detaches from most resin systems - for infusion and vaccuum works