Popular search terms
Botiga online especialitzada en resina epoxi, polièster i composites
- RESLIN The first 100% biodegradable resin ECO addremove
- JESMONITE addremove
- Infuvac addremove
- RTV Silicone addremove
- Epoxy resin addremove
- Polyester Resins addremove
- Gelcoats - Topcoats
- Fiberglass & Carbon addremove
- Pigments addremove
- Tools & Ancillaries addremove
- Silicone Moulds
1/4 "ALLEN MALE CONICAL PLUG (UD)
To seal any of the aluminum distributor outlets, remember to apply Teflon tape to all threads to be able to perform the infusion perfectly.
24/48 h Shipping
Secure payment
Easy returns
You might also like
1M2 INFUSION INITIATION KIT
Basic consumables set to make your first resin infusion or a small project or repair. materials for 1m2
HOSE 6-9MM 1 ML
Suitable for small vacuum systems, it saves resin by having a smaller inside diameter.
1/4 "FEMALE MALE REDUCED BALL VALVE (UD)
The key that allows to open and close the vacuum circuit in the infusion
8 other products in the same category:
ALUMINUM DISTRIBUTOR 4 OUTPUTS 1/4 "(UD)
Central control unit to connect the vacuum gauge, stopcocks or outputs
1/4 "FEMALE MALE REDUCED BALL VALVE (UD)
The key that allows to open and close the vacuum circuit in the infusion
TACKY TAPE 140ºC GRAY 15 ML (UD)
Sealing tape for the vacuum bag, 15 meter roll, ideal for resin infusion, vacuum compaction and sealing all joints, from the bag to the pump, through the resin trap.
RADIAL VACUOMETER 1/4 "63MM -1 BAR
Large vacuum gauge (63mm) to accurately measure the level of vacuum in the bag during infusion or vacuum compaction.
TEFLON TAPE 12MX12MMX0,075MM (UD)
TEFLON TAPE 12MX12MMX0.075MM (UD) sealing gasket to seal all vacuum connections
12MM PYRAMID - INFUSION (UD)
Pyramid for infusion, for 12 mm hose To connect the distribution system with a resin inlet and outlet hose. Made of high density polyethylene.,
PLASTIC T OUT 6MM (UD)
Useful part to divide the resin distribution circuit in the infusion
Customers who bought this product also bought:
RADIAL VACUOMETER 1/4 "63MM -1 BAR
Large vacuum gauge (63mm) to accurately measure the level of vacuum in the bag during infusion or vacuum compaction.
EPOXY RESIN KIT FOR INFUSION
SR 8100 epoxy resin with SD 8824 hardener (Standard) specific for resin infusion.
1/4 "FEMALE MALE REDUCED BALL VALVE (UD)
The key that allows to open and close the vacuum circuit in the infusion
SILSPRAY (UD)
Release agent by silicone oil spray, highly recommended to facilitate subsequent reproduction in silicone molds,
3K CARBON FIBER FABRIC OF 200GR / M2 120CM WIDTH
3K carbon fiber fabric of 200gr / m2
PLASTIC T OUT 6MM (UD)
Useful part to divide the resin distribution circuit in the infusion
MINI RESIN TRAP
The easiest and most economical solution to have an effective resin trap
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
To seal any of the aluminum distributor outlets, remember to apply Teflon tape to all threads to be able to perform the infusion perfectly.