Home

Subcategories

Active filters

  • Categories: Fiberglass & Carbon
  • Categories: Infuvac
  • Categories: Jesmonite
  • Categories: Polyester Resins
GLASS FIBER VEIL (CSM) 30 GR
Add to Compare
Resineco

GLASS FIBER VEIL (CSM) 30 GR

€1.98
Availability: 246 In Stock

Thinner fiber for first layer or reinforced gelcoats. Low resin consumption, very useful to reach every corner. It is also suitable for use with Jesmonite resin.

POLYESTER RESIN FOR FIBERGLASS
Add to Compare
Resineco

POLYESTER RESIN FOR FIBERGLASS

€12.15
Availability: 838 In Stock

Polyester resin for laminates and laminated with fiberglass. Low emission of styrene for less irritating odors, good adhesion and comfort of use. For all types of parts and general use.

JESMONITE AC100 KIT
Add to Compare
Jesmonite

JESMONITE AC100 KIT

€41.50
Availability: 51 In Stock

Jesmonite AC100 is the ideal resin to give life to your creativity. It is an alternative to polyester or polyurethane for all kinds of decorative pieces. Ideal with silicone molds.

JESMONITE AC730 STONE KIT
Add to Compare
Jesmonite

JESMONITE AC730 STONE KIT

€34.85
Availability: 2 In Stock

AC730 is the ideal resin for fiberglass reinforced decorative moldings. Ornaments and all kinds of sculptures. It is a suitable outdoor material. Available in a wide range of stone finishes. It can be used for small castings although its best performance is in laminated with fiberglass.

JESMONITE PIGMENT
Add to Compare
Jesmonite

JESMONITE PIGMENT

€7.80
Availability: 13 In Stock

Acrylic pigment for Jesmonite resin. It is applied to a maximum of 2% by weight. With the AC100 resin the most vivid colors are obtained by having a higher acrylic resin content.

Pigments are sold by weight and each color has a different density, so for some colors it may appear that the bottle is only half full. Especially white, oxides and terracotta.

PIGMENT SET JESMONITE 15X10GR
Add to Compare

PIGMENT SET JESMONITE 15X10GR

€57.70
Availability: 15 In Stock

Case with all the official Jesmonite pigments in 10gr presentation, for AC100, AC300 and AC84

includes:

  • 2 x 10g Black
  • 2 x 10g White
  • 1 x 10g Bright Yellow
  • 1 x 10g Oxide Yellow
  • 1 x 10g Orange
  • 1 x 10g Terracotta
  • 1 x 10g Coade (coffee)
  • 1 x 10g Green
  • 1 x 10g Blue
  • 1 x 10g Purple
  • 1 x 10g Pink
  • 1 x 10g Bright Red
  • 1 x 10g Oxide Red
GLASS FIBER MAT 450GR / M2
Add to Compare
Resineco

GLASS FIBER MAT 450GR / M2

€4.92
Availability: 923 In Stock

Thick weight. For repairs that require thickness, or a large number of layers. It can also be combined with finer weights or in some cases with 500gr Roving for maximum strength. Valid for polyester or epoxy

TACKY TAPE 140ºC GRAY 15 ML (UD)
Add to Compare
Infuvac

TACKY TAPE 140ºC GRAY 15 ML (UD)

€7.61
Availability: 868 In Stock

Sealing tape for the vacuum bag, 15 meter roll, ideal for resin infusion, vacuum compaction and sealing all joints, from the bag to the pump, through the resin trap.

NEON PIGMENT 50 GR - JESMONITE / RESLIN
Add to Compare

NEON PIGMENT 50 GR - JESMONITE / RESLIN

€6.70
Availability: 19 In Stock

Mineral pigments with neon-colored base. Perfect for use with Jesmonite AC100/AC200/AC300. You can give free rein to your creativity with really bright colors (neon effect).

Please note: does not light up in the dark! No fluorescent pigments.

V PLAIN 83 GR
Add to Compare
Resineco

V PLAIN 83 GR

€7.60
Availability: 35 In Stock

Flat fabric of 80 gr / m2 Format: 1 ML (width 1M) ideal for work with polyester resin or epoxy resin

FINE POLYESTER PUTTY 2 KG (UD)
Add to Compare
Resineco

FINE POLYESTER PUTTY 2 KG (UD)

€19.97
Availability: 8 In Stock

Polyester putty in 2 kg format, to refine details, rectify molds and repair fiberglass laminates with resin. Easily sandpaper Format 2 kg (includes catalyst)

V PLAIN 130 GR
Add to Compare
Resineco

V PLAIN 130 GR

€8.30
Availability: 61 In Stock

Flat fabric of 130 gr / m2 Format: 1 ML (width 1000mm) ideal for work with polyester resin or epoxy resin

AC100 STARTER KIT Terrazzo
  • Out of stock
Add to Compare
Jesmonite

AC100 STARTER KIT Terrazzo

€42.50
Availability: Out of stock

Pack that includes everything you need to start working with JESMONITE AC100:

Jesmonite AC100, 2 silicone molds & pigments BRIGHT YELLOW, BRIGHT RED and BLUE

V PLAIN 163 GR
Add to Compare
Resineco

V PLAIN 163 GR

€8.30
Availability: 866 In Stock

Flat fabric of 163 gr / m2 Format: 1 ML (width 1000mm) ideal for work with polyester resin or epoxy resin

Back to top