AC200 is a Jesmonite resin solution to obtain a soft compound that can be carved, milled or machined. Ideal for models and prototypes for sculptors and designers
(a modificar al mòdul de reassegurances del client)
(a modificar al mòdul de reassegurances del client)
(a modificar al mòdul de reassegurances del client)
AC200 is a Jesmonite resin solution to obtain a soft compound that can be carved, milled or machined. Ideal for models and prototypes for sculptors and designers
Mixing blades for acrylic resins 65 / 35 mm. Thanks to its design, prevents the formation of bubbles and achieve a homogeneous mixture in a few seconds. It adapts easily to any standard drill.
Resin application kit, either polyester, epoxy or jesmonite that includes:
Acrylic pigment for Jesmonite resin. It is applied to a maximum of 2% by weight. With the AC100 resin the most vivid colors are obtained by having a higher acrylic resin content.
Pigments are sold by weight and each color has a different density, so for some colors it may appear that the bottle is only half full. Especially white, oxides and terracotta.
AC300 is the solution for castings and castings of acrylic resin in mold, to obtain solid pieces with a lower cost than AC100. You can do casting of any size.
Thinner fiber for first layer or reinforced gelcoats. Low resin consumption, very useful to reach every corner. It is also suitable for use with Jesmonite resin.
Release agent by silicone oil spray, highly recommended to facilitate subsequent reproduction in silicone molds,
Alginate is a material for quick molds, with water and suitable for reproductions of body parts since it is not toxic and can be in direct contact with the skin.
Jesmonite AC100 is the ideal resin to give life to your creativity. It is an alternative to polyester or polyurethane for all kinds of decorative pieces. Ideal with silicone molds.
The specific fiberglass for Jesmonite AC100 and AC730 resins. This type of glass reinforcement has been custom designed for use with Jesmonite. Very easy to adapt and work. Flame retardant
Medium weight. versatile for molds and repairs of all kinds. The most common fiber for polyester resin.
Structural filler of cut fiberglass chopped strands. To reinforce resins of polyester, epoxy and acrylic resin Jesmonite.
AC200 is a Jesmonite resin solution to obtain a soft compound that can be carved, milled or machined. Ideal for models and prototypes for sculptors and designers
