Thinner fiber for first layer or reinforced gelcoats. Low resin consumption, very useful to reach every corner. It is also suitable for use with Jesmonite resin.
(a modificar al mòdul de reassegurances del client)
(a modificar al mòdul de reassegurances del client)
(a modificar al mòdul de reassegurances del client)
Thinner fiber for first layer or reinforced gelcoats. Low resin consumption, very useful to reach every corner. It is also suitable for use with Jesmonite resin.
Standard epoxy resin for laminates with fiberglass, carbon fiber, coating of portrex (expanded polystyrene). Thanks to its medium viscosity and fast drying it is widely used for all types of repairs, molds and final piece.
Jesmonite AC100 is the ideal resin to give life to your creativity. It is an alternative to polyester or polyurethane for all kinds of decorative pieces. Ideal with silicone molds.
Polyester resin for laminates and laminated with fiberglass. Low emission of styrene for less irritating odors, good adhesion and comfort of use. For all types of parts and general use.
Fine weight, ideal for parts with many corners or corners that are difficult to adapt. Valid for polyester or epoxy.
Medium weight. versatile for molds and repairs of all kinds. The most common fiber for polyester resin.
Thick weight. For repairs that require thickness, or a large number of layers. It can also be combined with finer weights or in some cases with 500gr Roving for maximum strength. Valid for polyester or epoxy
Premium TR 104 high temperature wax is a high production paste formulated to work in temperature curing processes.
Polyester resin for laminates and laminated with fiberglass. Low emission of styrene for less irritating odors, good adhesion and comfort of use. For all types of parts and general use.
Metal roller with parallel grooves, for deaerated work with composites, application of polyester resin and fiberglass or carbon / epoxy
AC730 is the ideal resin for fiberglass reinforced decorative moldings. Ornaments and all kinds of sculptures. It is a suitable outdoor material. Available in a wide range of stone finishes. It can be used for small castings although its best performance is in laminated with fiberglass.
Alginate is a material for quick molds, with water and suitable for reproductions of body parts since it is not toxic and can be in direct contact with the skin.
Pack that includes everything you need to start working with JESMONITE AC100:
Jesmonite AC100, 2 silicone molds & pigments BRIGHT YELLOW, BRIGHT RED and BLUE
Innovative modeling paste and suitable for any application. Format 1 Kg.
Important note: These molding pastes never dry, thanks to their high wax and oil content.
Thinner fiber for first layer or reinforced gelcoats. Low resin consumption, very useful to reach every corner. It is also suitable for use with Jesmonite resin.
