Home

Subcategories

Active filters

  • Categories: Infuvac
  • Categories: Jesmonite
  • Categories: Resina Epoxi
JESMONITE AC100 KIT
Add to Compare
Jesmonite

JESMONITE AC100 KIT

€41.50
Availability: 51 In Stock

Jesmonite AC100 is the ideal resin to give life to your creativity. It is an alternative to polyester or polyurethane for all kinds of decorative pieces. Ideal with silicone molds.

EPOXI FIBER KIT
Add to Compare
Resineco

EPOXI FIBER KIT

€36.09
Availability: 7 In Stock

Standard epoxy resin for laminates with fiberglass, carbon fiber, coating of portrex (expanded polystyrene). Thanks to its medium viscosity and fast drying it is widely used for all types of repairs, molds and final piece.

JESMONITE AC730 STONE KIT
Add to Compare
Jesmonite

JESMONITE AC730 STONE KIT

€34.85
Availability: 2 In Stock

AC730 is the ideal resin for fiberglass reinforced decorative moldings. Ornaments and all kinds of sculptures. It is a suitable outdoor material. Available in a wide range of stone finishes. It can be used for small castings although its best performance is in laminated with fiberglass.

EPOXI TRANSPARENT
Add to Compare
Resineco

EPOXI TRANSPARENT

€11.98
Availability: 9 In Stock

Transparent epoxy resin. Low viscosity and adherence to pieces of jewelry. It has very good UV stability.

JESMONITE PIGMENT
Add to Compare
Jesmonite

JESMONITE PIGMENT

€7.80
Availability: 13 In Stock

Acrylic pigment for Jesmonite resin. It is applied to a maximum of 2% by weight. With the AC100 resin the most vivid colors are obtained by having a higher acrylic resin content.

Pigments are sold by weight and each color has a different density, so for some colors it may appear that the bottle is only half full. Especially white, oxides and terracotta.

PIGMENT SET JESMONITE 15X10GR
Add to Compare

PIGMENT SET JESMONITE 15X10GR

€57.70
Availability: 15 In Stock

Case with all the official Jesmonite pigments in 10gr presentation, for AC100, AC300 and AC84

includes:

  • 2 x 10g Black
  • 2 x 10g White
  • 1 x 10g Bright Yellow
  • 1 x 10g Oxide Yellow
  • 1 x 10g Orange
  • 1 x 10g Terracotta
  • 1 x 10g Coade (coffee)
  • 1 x 10g Green
  • 1 x 10g Blue
  • 1 x 10g Purple
  • 1 x 10g Pink
  • 1 x 10g Bright Red
  • 1 x 10g Oxide Red
TACKY TAPE 140ºC GRAY 15 ML (UD)
Add to Compare
Infuvac

TACKY TAPE 140ºC GRAY 15 ML (UD)

€7.61
Availability: 868 In Stock

Sealing tape for the vacuum bag, 15 meter roll, ideal for resin infusion, vacuum compaction and sealing all joints, from the bag to the pump, through the resin trap.

NEON PIGMENT 50 GR - JESMONITE / RESLIN
Add to Compare

NEON PIGMENT 50 GR - JESMONITE / RESLIN

€6.70
Availability: 19 In Stock

Mineral pigments with neon-colored base. Perfect for use with Jesmonite AC100/AC200/AC300. You can give free rein to your creativity with really bright colors (neon effect).

Please note: does not light up in the dark! No fluorescent pigments.

EPOXI HCAST KIT
Add to Compare
Resineco

EPOXI HCAST KIT

€92.35
Availability: 1 In Stock

Transparent epoxy resin for large castings, thicknesses up to 7cm. Specially formulated for river tables, epoxy art with wood.

SURF CLEAR EPOXY
Add to Compare
Resineco

SURF CLEAR EPOXY

€48.51
Availability: 4 In Stock

Transparent epoxy for fiberglass. Its medium viscosity and adherence is perfect to manufacture and repair of laminates. It has very good UV stability

AC100 STARTER KIT Terrazzo
  • Out of stock
Add to Compare
Jesmonite

AC100 STARTER KIT Terrazzo

€42.50
Availability: Out of stock

Pack that includes everything you need to start working with JESMONITE AC100:

Jesmonite AC100, 2 silicone molds & pigments BRIGHT YELLOW, BRIGHT RED and BLUE

GREENPOXY 55
  • Out of stock
Add to Compare
Resineco

GREENPOXY 55

€54.45
Availability: Out of stock

Epoxy resin with Bio Mass 55% Replaces the consumption of mineral resources by plant resources

Silicone stick for mixing
  • Out of stock
Add to Compare

Silicone stick for mixing

€1.50
Availability: Out of stock

Silicone stick for mixing all types of resins. Very easy to clean and reuse to avoid residue.

THIXOTROPE FOR JESMONITE
Add to Compare
Resineco

THIXOTROPE FOR JESMONITE

€4.50
Availability: 35 In Stock

Thixotropic thickener additive for resin references Jesmonite AC100, AC200, AC300. So you don't pick up. Save time and material. Recommended mixing ratio of 2 to 6 grams per kg of mixture.

MIXING BLADE LIGHT DUTY (UD)
Add to Compare
Jesmonite

MIXING BLADE LIGHT DUTY (UD)

€23.00
Availability: 8 In Stock

Mixing blades for acrylic resins 65 / 35 mm. Thanks to its design, prevents the formation of bubbles and achieve a homogeneous mixture in a few seconds. It adapts easily to any standard drill.

Back to top