Subcategories

Active filters

  • Categories: Jesmonite
  • Categories: Polyester Resins
  • Categories: Resina Epoxi
  • Categories: RTV Silicone
SILSPRAY (UD)
Add to Compare
Resineco

SILSPRAY (UD)

€6.00
Availability: 40 In Stock

Release agent by silicone oil spray, highly recommended to facilitate subsequent reproduction in silicone molds,

AC100 STARTER KIT Terrazzo
  • Out of stock
Add to Compare
Jesmonite

AC100 STARTER KIT Terrazzo

€42.50
Availability: Out of stock

Pack that includes everything you need to start working with JESMONITE AC100:

Jesmonite AC100, 2 silicone molds & pigments BRIGHT YELLOW, BRIGHT RED and BLUE

THIX - FOR SILICONE
Add to Compare
Resineco

THIX - FOR SILICONE

€11.56
Availability: 940 In Stock

Solution to modify the viscosity of RTV silicones. Especially recommended for SILTHIXO silicone. Save time and silicone.

GREENPOXY 55
  • Out of stock
Add to Compare
Resineco

GREENPOXY 55

€54.45
Availability: Out of stock

Epoxy resin with Bio Mass 55% Replaces the consumption of mineral resources by plant resources

Silicone stick for mixing
  • Out of stock
Add to Compare

Silicone stick for mixing

€1.50
Availability: Out of stock

Silicone stick for mixing all types of resins. Very easy to clean and reuse to avoid residue.

ALGINATE 450 GRS (UD)
Add to Compare
Clipalgin

ALGINATE 450 GRS (UD)

€9.95
Availability: 17 In Stock

Alginate is a material for quick molds, with water and suitable for reproductions of body parts since it is not toxic and can be in direct contact with the skin.

Vaselina pura en pasta 30 gr
Add to Compare

Vaselina pura en pasta 30 gr

€4.24
Availability: 20 In Stock

Vaseline paste to be used as a release agent between silicone and silicone, or to isolate clay or plaster in molds with other resins

THIXOTROPE FOR JESMONITE
Add to Compare
Resineco

THIXOTROPE FOR JESMONITE

€4.50
Availability: 35 In Stock

Thixotropic thickener additive for resin references Jesmonite AC100, AC200, AC300. So you don't pick up. Save time and material. Recommended mixing ratio of 2 to 6 grams per kg of mixture.

CALCIUM CARBONATE
Add to Compare
Reverte

CALCIUM CARBONATE

€4.24
Availability: 896 In Stock

Usual filler for casting polyester resin. Increase the volume of the resin, gives mechanical properties. Reduce the exotherm of the resin and reduce the cost of the final piece.

MIXING BLADE LIGHT DUTY (UD)
Add to Compare
Jesmonite

MIXING BLADE LIGHT DUTY (UD)

€23.00
Availability: 8 In Stock

Mixing blades for acrylic resins 65 / 35 mm. Thanks to its design, prevents the formation of bubbles and achieve a homogeneous mixture in a few seconds. It adapts easily to any standard drill.

PARAFINNED STYRENE
Add to Compare
Resineco

PARAFINNED STYRENE

€11.14
Availability: 14 In Stock

Styrene monomer with 5% paraffin addition. To remove the mordant of polyester resins. Turn a Gel-Coat into a Top-Coat or to surfboard glaze.

AC730 ACID ETCH
  • Out of stock
Add to Compare
Jesmonite

AC730 ACID ETCH

€11.98
Availability: Out of stock

Acid Etch is used to expose the fine decorative aggregate in Jesmonite AC730 materials. Removes the cement rich film from the surface

AEROSIL 350 GR (UD)
Add to Compare
Resineco

AEROSIL 350 GR (UD)

€14.82
Availability: 37 In Stock

Aerosil or Cabosil, are trademarks of the same product. It is an additive to increase the viscosity of epoxy resins, polyester and other fluids. 350 grs format. Its main component is "Pyrogenic Silica"

AC730 RETARDER
Add to Compare
Jesmonite

AC730 RETARDER

€11.60
Availability: 8 In Stock

Retardant for the Jesmonite AC730 and AC730 FLEX resin. Recommended ratio of 2 to 8 grs per kg of mixture.

QUADRIAXIAL GLASS FIBER FABRIC
Add to Compare
Resineco

QUADRIAXIAL GLASS FIBER FABRIC

€8.85
Availability: 23 In Stock

The specific fiberglass for Jesmonite AC100 and AC730 resins. This type of glass reinforcement has been custom designed for use with Jesmonite. Very easy to adapt and work. Flame retardant

Back to top