AC300 LIQUIDS

Acrylic sealant for Jesmonite to protect parts made with Jesmonite AC100, AC200 and AC300.

Glitter chips are fine like sand, also a little coarser up to about 3mm and can be mixed excellently with Jesmonite or other resins. Glitter chips give your creation an elegant and attractive final result!

Perfect for use with JESMONITE AC100

Size 30gr

Case with 10 official Jesmonite pigments in 50gr presentation, for AC100, AC300 and AC84

includes:

1 x 50g Black

1 x 50g White

1 x 50g Bright Yellow

1 x 50g Oxide Yellow

1 x 50g Terracotta

1 x 50g Coade (coffee)

1 x 50g Green

1 x 50g Blue

1 x 50g Bright Red

1 x 50g Oxide Red

AC300 is the solution for castings and castings of acrylic resin in mold, to obtain solid pieces with a lower cost than AC100. You can do casting of any size.

The vibrating platform is a great help to remove bubbles in the moulds, achieve a homogeneous mixture and improve the result of all your pieces with Jesmonite.

The silver flakes are so fine and soft and can be mixed excellently with Jesmonite or other resins. get an elegant and eye-catching final result!

Perfect for use with JESMONITE AC100

Format 5 gr

Get more work time with the retarder for Jesmonite AC100, AC200, AC300 resin references. Recommended mixing ratio of 2 to 8 grams per kg of mixture.

60x40cm silicone mat, ideal for working with any resin and easy to clean.

Spray varnish for Jesmonite pieces. Matt finish.

Easy to apply. 150ml format

Acrylic sealant GLOSS for Jesmonite to protect parts made with Jesmonite AC100, AC200 and AC300.

Spray varnish for Jesmonite pieces. Glossy finish.

Easy to apply. 150ml format

Case with all the official Jesmonite pigments in 10gr presentation, for AC100, AC300 and AC84

includes:

• 2 x 10g Black
• 2 x 10g White
• 1 x 10g Bright Yellow
• 1 x 10g Oxide Yellow
• 1 x 10g Orange
• 1 x 10g Terracotta
• 1 x 10g Coade (coffee)
• 1 x 10g Green
• 1 x 10g Blue
• 1 x 10g Purple
• 1 x 10g Pink
• 1 x 10g Bright Red
• 1 x 10g Oxide Red

Powerful and environmentally friendly detergent. Safe for cleaning all types of molds. Removes residues of JESMONITE, pigments, glitters, metallic powders, from the mold.

155mm long wooden sticks for mixing all types of resins. Pack of 25 units

Mixing blades for acrylic resins 65 / 35 mm. Thanks to its design, prevents the formation of bubbles and achieve a homogeneous mixture in a few seconds. It adapts easily to any standard drill.

The specific fiberglass for Jesmonite AC100 and AC730 resins. This type of glass reinforcement has been custom designed for use with Jesmonite. Very easy to adapt and work. Flame retardant

Release agent by silicone oil spray, highly recommended to facilitate subsequent reproduction in silicone molds,

Polyester resin for laminates and laminated with fiberglass. Low emission of styrene for less irritating odors, good adhesion and comfort of use. For all types of parts and general use.

RTV (Room Temperature Vulcanization) Silicone Standard for all types of fast, flexible and non-stick molds.

Alginate is a material for quick molds, with water and suitable for reproductions of body parts since it is not toxic and can be in direct contact with the skin.

Buy here the base of the Jesmonite AC100 resin separately, in the format you need, either because you have missed it or because you make a different mixture than recommended to achieve different results. Select the size according to your need

Buy the Liquid of the Jesmonite AC100 resin separately, in the format you need, either because you have missed it or because you make a different mixture than the recommended one to achieve different results.

Get more work time with the retarder for Jesmonite AC100, AC200, AC300 resin references. Recommended mixing ratio of 2 to 8 grams per kg of mixture.