Pure metal filler for Jesmonite resins. 99,9% of metal powder to achieve amazing real metal effects.
(a modificar al mòdul de reassegurances del client)
(a modificar al mòdul de reassegurances del client)
(a modificar al mòdul de reassegurances del client)
filler for Jesmonite resins. It contains authentic metal particles that provide a spectacular finish as well as the particles on the surface are clearly seen.
* It can also be used with polyester resins
Resin application kit, either polyester, epoxy or jesmonite that includes:
Jesmonite AC100 is the ideal resin to give life to your creativity. It is an alternative to polyester or polyurethane for all kinds of decorative pieces. Ideal with silicone molds.
AC300 is the solution for castings and castings of acrylic resin in mold, to obtain solid pieces with a lower cost than AC100. You can do casting of any size.
Polyester resin for laminates and laminated with fiberglass. Low emission of styrene for less irritating odors, good adhesion and comfort of use. For all types of parts and general use.
Polyester resin for casting of any size, without pre-accelerating. Cobalt Octoate and MEK must be added depending on the size of the casting.
Spray varnish for Jesmonite pieces. Glossy finish.
Easy to apply. 150ml format
Silicone stick for mixing all types of resins. Very easy to clean and reuse to avoid residue.
Buy here the base of the Jesmonite AC100 resin separately, in the format you need, either because you have missed it or because you make a different mixture than recommended to achieve different results. Select the size according to your need
Styrene monomer with 5% paraffin addition. To remove the mordant of polyester resins. Turn a Gel-Coat into a Top-Coat or to surfboard glaze.
Brush with wooden handle for all types of work with polyester resins, acrylic resins and paints._x000D_ _x000D_ Format: 1 unit
Glass microspheres filler for the production of putties, filleting and reinforcement of polyester and epoxy resins.
The vibrating platform is a great help to remove bubbles in the moulds, achieve a homogeneous mixture and improve the result of all your pieces with Jesmonite.
Fine weight, ideal for parts with many corners or corners that are difficult to adapt. Valid for polyester or epoxy.
Pure metal filler for Jesmonite resins. 99,9% of metal powder to achieve amazing real metal effects.
