JESMONITE AC730 STONE KIT

60x40cm silicone mat, ideal for working with any resin and easy to clean.

Case with all the official Jesmonite pigments in 10gr presentation, for AC100, AC300 and AC84

includes:

• 2 x 10g Black
• 2 x 10g White
• 1 x 10g Bright Yellow
• 1 x 10g Oxide Yellow
• 1 x 10g Orange
• 1 x 10g Terracotta
• 1 x 10g Coade (coffee)
• 1 x 10g Green
• 1 x 10g Blue
• 1 x 10g Purple
• 1 x 10g Pink
• 1 x 10g Bright Red
• 1 x 10g Oxide Red

155mm long wooden sticks for mixing all types of resins. Pack of 25 units

Mixing blades for acrylic resins 65 / 35 mm. Thanks to its design, prevents the formation of bubbles and achieve a homogeneous mixture in a few seconds. It adapts easily to any standard drill.

Buy the Liquid of the Jesmonite AC7300 stone resin separately, in the format you need, either because you have missed it or because you make a different mixture than the recommended one to achieve different results.

Powerful and environmentally friendly detergent. Safe for cleaning all types of molds. Removes residues of JESMONITE, pigments, glitters, metallic powders, from the mold.

Retardant for the Jesmonite AC730 and AC730 FLEX resin. Recommended ratio of 2 to 8 grs per kg of mixture.

Acid Etch is used to expose the fine decorative aggregate in Jesmonite AC730 materials. Removes the cement rich film from the surface

Case with 10 official Jesmonite pigments in 50gr presentation, for AC100, AC300 and AC84

includes:

1 x 50g Black

1 x 50g White

1 x 50g Bright Yellow

1 x 50g Oxide Yellow

1 x 50g Terracotta

1 x 50g Coade (coffee)

1 x 50g Green

1 x 50g Blue

1 x 50g Bright Red

1 x 50g Oxide Red

Resin application kit, either polyester, epoxy or jesmonite that includes:

The vibrating platform is a great help to remove bubbles in the moulds, achieve a homogeneous mixture and improve the result of all your pieces with Jesmonite.

Buy the base of the Jesmonite AC730 stone resin separately, in the format you need, either because you have missed it or because you make a different mixture than recommended to achieve different results.

Jesmonite AC84 is a two-component, water-based acrylic resin, perfect for creating stone-like pieces from molds. Known for its high durability and precise detail reproduction, it offers a realistic stone finish without the heavy weight. Easy to use, customizable with pigments, and safe, as it emits no toxic fumes. Ideal for sculptors, designers, and creators of artistic and decorative pieces.

Spray varnish for Jesmonite pieces. Matt finish.

Easy to apply. 150ml format

AC730 Flex Metal is the best solution to obtain metal effect in pieces from silicone mold with Jesmonite resin. Get the effect and behavior of the metal. Alternative to cast copper, bronze, silver or brass. select the finish and format you need

Case with 10 official Jesmonite pigments in 50gr presentation, for AC100, AC300 and AC84

includes:

1 x 50g Black

1 x 50g White

1 x 50g Bright Yellow

1 x 50g Oxide Yellow

1 x 50g Terracotta

1 x 50g Coade (coffee)

1 x 50g Green

1 x 50g Blue

1 x 50g Bright Red

1 x 50g Oxide Red

Release agent by silicone oil spray, highly recommended to facilitate subsequent reproduction in silicone molds,

Brush with wooden handle for all types of work with polyester resins, acrylic resins and paints._x000D_ _x000D_ Format: 1 unit

Pure Acetone is used to clean tools and spots of resin of polyester or epoxi and gel-coats

Polyester resin for laminates and laminated with fiberglass. Low emission of styrene for less irritating odors, good adhesion and comfort of use. For all types of parts and general use.

Jesmonite AC84 is a two-component, water-based acrylic resin, perfect for creating stone-like pieces from molds. Known for its high durability and precise detail reproduction, it offers a realistic stone finish without the heavy weight. Easy to use, customizable with pigments, and safe, as it emits no toxic fumes. Ideal for sculptors, designers, and creators of artistic and decorative pieces.