SR 8100 epoxy resin with SD 8824 hardener (Standard) specific for resin infusion.
(a modificar al mòdul de reassegurances del client)
(a modificar al mòdul de reassegurances del client)
(a modificar al mòdul de reassegurances del client)
SR 8100 epoxy resin with SD 8824 hardener (Standard) specific for resin infusion.
Vacuum bag for infusion or vacuum. 65 microns, blue, width 2 meters (folded in half)
Flowmesh is a perfect drain mesh for learning, thanks to its flexibility and ease of application. It comes with black weft threads that indicate the optimal resin flow direction. Thanks to its great flexibility, it is the most recommended mesh for small surfaces with complicated, angular areas.
Suitable for small vacuum systems, it saves resin by having a smaller inside diameter.
Apply the Peel ply to the entire surface you want to separate from the fiberglass / carbon and other consumables.
Sealing tape for the vacuum bag, 15 meter roll, ideal for resin infusion, vacuum compaction and sealing all joints, from the bag to the pump, through the resin trap.
Low density polyethylene spiral, for resin distribution in an infusion system.
Basic consumables set to make your first resin infusion or a small project or repair. materials for 1m2
Low density polyethylene spiral, for resin distribution in an infusion system.
Polyester resin for laminates and laminated with fiberglass. Low emission of styrene for less irritating odors, good adhesion and comfort of use. For all types of parts and general use.
Suitable for small vacuum systems, it saves resin by having a smaller inside diameter.
3K carbon fiber fabric of 200gr / m2
Catalyst for polyester resins and gelcoats. Usual ratio 1.25 to 2%. Always consult the resin technical data sheet.
Biaxial fiberglass fabric +/- 45º Format: 1 M2 (width 1250mm) ideal for works with polyester resin or epoxy resin
SR 8100 epoxy resin with SD 8824 hardener (Standard) specific for resin infusion.
